Elastoforming - Machines

Cyril Bath Company designs and manufactures a wide range of standard and custom made Elastoforming presses.
Our advanced patented design allows our machines to have high performances and to be very competitive. The main features of this design are:

  • The machine is an up-stroke uni-axial table, with a fixed container.
  • A multi-layered pad with a special wear-out forming surface. Thanks to this wear-out layer, the service life of the pad is multiplied by 15 to 20.
  • The elastomer used for the pad has been developed by our R&D department to combine the best forming capability with the longer service life.
  • The frame structure consists of single, heavy, hot-rolled, steel plates. This frame so constituted is of solid construction, without welded or mechanical joint. It is very safe and compact.
  • A single, high pressure, hydraulic cylinder, supplies the forming force. It is made of high yield strength alloy, to combine the best safety and compactness.
  • The pad container is made of a single piece, high strength, forged alloy.

All the structure is fully checked with F.E.A. analysis.

 

EMCL
1925 Ton

EMCL
3850 Ton
EMCL
5800 Ton
EMCL
7600 Ton
Operating Characteristics
Forming Pressure (PSI) 6,000 11,000 6,000 11,000 11,000 11,000
Table Shape Circular Circular Oblong Oblong Oblong Oblong
Table dimensions (inch.) Dia. 28" Dia. 21" 48" x 30" 33" x 24" 41" x 29" 50" x 32"
Pad height (inch.) 10" 10" 12" 10" 10" 10"
Max. tool height (inch.) 3.3" 3.3" 4" 3.3" 3.3" 3.3"
Daylight (inch.) 4" 4" 6" 4" 4" 4"
Max. cycle time with a single pump (sec.) 64 64 66 62 66 62
Max. cycle time with two pumps (sec.) 35 35 32 30 37 34
Machine Characteristics
Installed power (single / twin pumps) (Hp) 30/60 30/60 60/120 60/120 90/180 120/240
Total height (inch.) 144" 144" 174" 153" 155" 159"
Total width (inch.) 80" 77" 95" 92" 104" 114"
Total length (With two tables) (inch.) 135" 122" 180" 154" 180" 207"